Hardox 500 Abrasion Resistant 500HB Steel Plate
Hardox 500 Abrasion Resistant 500HB Steel Plate
Hardox 500 Abrasion Resistant 500HB Steel Plate
ashtapad
 Hardox 500 Abrasion Resistant 500HB Steel PlateProduct Catalog  
 Hardox 500 Abrasion Resistant 500HB Steel PlatePipes/Tubes
 Hardox 500 Abrasion Resistant 500HB Steel PlateHollow Sections
 Hardox 500 Abrasion Resistant 500HB Steel PlateFittings/Flanges
 Hardox 500 Abrasion Resistant 500HB Steel PlatePlates/Sheets/Coils
 Hardox 500 Abrasion Resistant 500HB Steel PlateHot Rolled Steel Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateHot Rolled Steel Sheets
 Hardox 500 Abrasion Resistant 500HB Steel PlateHot Rolled Coils
 Hardox 500 Abrasion Resistant 500HB Steel PlateRods/Bars/Wires
 Hardox 500 Abrasion Resistant 500HB Steel PlateBars For Oil & Gas
 Hardox 500 Abrasion Resistant 500HB Steel PlateForged Round Bars
 Hardox 500 Abrasion Resistant 500HB Steel PlateHexagon Bars
 Hardox 500 Abrasion Resistant 500HB Steel PlateSquare Bars
 Hardox 500 Abrasion Resistant 500HB Steel PlateCold Drawn Bars
 Hardox 500 Abrasion Resistant 500HB Steel PlateForged Disk/Circles
 Hardox 500 Abrasion Resistant 500HB Steel PlateStructural Steels
 Hardox 500 Abrasion Resistant 500HB Steel PlateFlat Bars/Strips
 Hardox 500 Abrasion Resistant 500HB Steel PlateStuds/Bolts/Nuts
 Hardox 500 Abrasion Resistant 500HB Steel PlateThreaded Bars/Rods
 Hardox 500 Abrasion Resistant 500HB Steel PlateFasteners
 Hardox 500 Abrasion Resistant 500HB Steel PlateSA193 B7 Stud Bolts
 Hardox 500 Abrasion Resistant 500HB Steel PlateSA193 B16 Stud Bolts
 Hardox 500 Abrasion Resistant 500HB Steel PlateSA194 2H HEX NUTS
 Hardox 500 Abrasion Resistant 500HB Steel PlateCorten Steels
 Hardox 500 Abrasion Resistant 500HB Steel PlateSAILCOR IRSM41
 Hardox 500 Abrasion Resistant 500HB Steel PlateSpring Steel Bars
 Hardox 500 Abrasion Resistant 500HB Steel PlateBoiler/PVQ Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateStructural Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateAlloy Steel Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateShipbuilding Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateLRS Grade-A/B Plates 
 Hardox 500 Abrasion Resistant 500HB Steel PlateABS Grade-A/B Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateDNV Grade-A/B Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateBV Grade-A/B Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateSABS 1431:1987 Steels
 Hardox 500 Abrasion Resistant 500HB Steel PlateQ&T Steel Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlatePlate Sizes & Grades
 Hardox 500 Abrasion Resistant 500HB Steel PlateSA516-60/70 HIC Tested
 Hardox 500 Abrasion Resistant 500HB Steel PlateSA516-60/70 Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateSA515-60/70 Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateST52-3 DIN 17100
 Hardox 500 Abrasion Resistant 500HB Steel PlateS355J2G3 EN 10025-2
 Hardox 500 Abrasion Resistant 500HB Steel PlateS355K2G3 EN 10025-2
 Hardox 500 Abrasion Resistant 500HB Steel PlateS355J2+N EN 10025-2
 Hardox 500 Abrasion Resistant 500HB Steel PlateS355K2+N EN 10025-2
 Hardox 500 Abrasion Resistant 500HB Steel PlateEN 10025-2 Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateEN 10028-2/3 Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateAbrasion Resistant Steel
 Hardox 500 Abrasion Resistant 500HB Steel PlateWear Resistant Steel
 Hardox 500 Abrasion Resistant 500HB Steel PlateHardox 400/450 Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateHardox 500/600 Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateWeldox 700 Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateSAILMA 350/350HI Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateSAILMA 410/410HI Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateSAILMA 450/450HI Plates
 Hardox 500 Abrasion Resistant 500HB Steel PlateSeamless Pipes/Tubes
 Hardox 500 Abrasion Resistant 500HB Steel PlateWelded Pipes/Tubes
 Hardox 500 Abrasion Resistant 500HB Steel PlateERW/EFW Pipes/Tubes
 Hardox 500 Abrasion Resistant 500HB Steel PlateSAW/HFW Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateASTM A234/ASME SA234
 Hardox 500 Abrasion Resistant 500HB Steel PlateASTM A403/ASME SA403
 Hardox 500 Abrasion Resistant 500HB Steel PlateASTM A420/ASME SA420
 Hardox 500 Abrasion Resistant 500HB Steel PlateASTM A860/ASME SA860
 Hardox 500 Abrasion Resistant 500HB Steel PlateLong Radius Bends
 Hardox 500 Abrasion Resistant 500HB Steel PlateHot Induction Bends
 Hardox 500 Abrasion Resistant 500HB Steel PlateForged Fittings
 Hardox 500 Abrasion Resistant 500HB Steel PlateForged Flanges
 Hardox 500 Abrasion Resistant 500HB Steel PlateAPI 5L Line Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateAPI 5L Gr.B PSL1/2 Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateAPI 5L X42 PSL1/2 Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateAPI 5L X46 PSL1/2 Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateAPI 5L X52 PSL1/2 Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateAPI 5L X56 PSL1/2 Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateAPI 5L X60 PSL1/2 Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateAPI 5L X65 PSL1/2 Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateAPI 5L X70 PSL1/2 Pipes
 Hardox 500 Abrasion Resistant 500HB Steel PlateHigh Speed Steels
 Hardox 500 Abrasion Resistant 500HB Steel PlateCold Work Tool Steels
 Hardox 500 Abrasion Resistant 500HB Steel PlateHot Work Tool Steels
 Hardox 500 Abrasion Resistant 500HB Steel PlatePlastic Moulding Steels
 Hardox 500 Abrasion Resistant 500HB Steel PlateBS970 Specifications
 Hardox 500 Abrasion Resistant 500HB Steel PlateSAE Specifications
 Hardox 500 Abrasion Resistant 500HB Steel PlateJIS Specifications
 Hardox 500 Abrasion Resistant 500HB Steel PlateASTM Standard Spec
 Hardox 500 Abrasion Resistant 500HB Steel PlateASME Standard Spec
 Hardox 500 Abrasion Resistant 500HB Steel PlateAerospace Alloys Spec
 Hardox 500 Abrasion Resistant 500HB Steel PlateEquivalent Grades 
 Hardox 500 Abrasion Resistant 500HB Steel PlateEquivalent Standards 
 Hardox 500 Abrasion Resistant 500HB Steel Plate Technical Specifications
 Hardox 500 Abrasion Resistant 500HB Steel PlateDIN Material No.
 Hardox 500 Abrasion Resistant 500HB Steel PlateMechanical Properties
 Hardox 500 Abrasion Resistant 500HB Steel PlateChemical Composition
 Hardox 500 Abrasion Resistant 500HB Steel PlateDensity
 Hardox 500 Abrasion Resistant 500HB Steel PlateTrade Leads
 Hardox 500 Abrasion Resistant 500HB Steel PlateContact Us
 Hardox 500 Abrasion Resistant 500HB Steel PlateLinks
steel tubing, steel tube, steel sheet, steel plate, steel pipe, steel flanges, steel coil, steel fasteners, steel piping
 

Hardox 500 Abrasion Resistant 500HB Steel Plate :

Manufacturers & Exporters Hardox 500 Abrasion Resistant 500HB Steel Plate Supplier in Mumbai India

hardox 500 equivalent astm, hardox 500 equivalent, equivalent of hardox 500, hardox 550 equivalent, hardox plate equivalent



Ashtapad is India's one of the leading steel plate manufacture specialize in steel Sheet steel Plate steel Coil and others products products " Stainless steel, Carbon steel, Alloy steel, Nickel , Other Ferrous & Non-Ferrous metals In Shape Of steel Sheet Plate Coil Etc. Suppliers of Boiler Plate, PVQ Coils, Carbon Steel (SS) Duplex Steel Coils, Stainless Steel Coils, Alloy Steel Coils, Mild Steel Coils, Kovar Coils, Titanium Coils, Tantalum Coils, Nickel Coils, Zirconium Coils, Hastelloy Coils, Incolloy Coils, Cupro nickel Coils, Niobium Coils, Nimonics Coils, HR Alloy Coils, Alloy 20 Coils, Monel Coils, Inconel Coils, Super Duplex Coils, Duplex Steel Plates, Stainless Steel Plates, Alloy Steel Plates, Mild Steel Plates, Kovar Plates, Titanium Plates, Tantalum Plates, Nickel Plates, Zirconium Plates, Hastelloy Plates, Incolloy Plates, Cupro nickel Plates, Niobium Plates, Nimonics Plates, HR Alloy Plates, Alloy 20 Plates, Monel Plates, Inconel Plates, Super Duplex Plates Duplex Steel Sheet, Stainless Steel Sheet, Alloy Steel Sheet, Mild Steel Sheet, Kovar Sheet, Titanium Sheet, Tantalum Sheet, Nickel Sheet, Zirconium Sheet, Hastelloy Sheet, Incolloy Sheet, Cupro nickel Sheet, Niobium Sheet, Nimonics Sheet, HR Alloy Sheet, Alloy 20 Sheet, Monel Sheet, Inconel Sheet, Super Duplex Sheet Etc.
Product Catalog 
Hardox 500 Abrasion Resistant 500HB Steel Plate
Hardox 500 Abrasion Resistant 500HB Steel Plate
Model No.︰Hardox 500
Brand Name︰Hardox 500 Abrasion Resistant 500HB Steel Plate
Country of Origin︰Sweden
Unit Price︰-
Minimum Order︰-
 
 
 
(21 To 40) Prev << - : 41 :: 42 :: 43 :: 44 :: 45 :: 46 :: 47 :: 48 :: 49 :: 50 :: 51 :: 52 :: 53 :: 54 :: 55 :: 56 :: 57 :: 58 :: 59 :: 60:: ->> NEXT Page (61 to 80)
 

Hardox 500 Abrasion Resistant 500HB Steel Plate

We are Stockholder & Distributors of Boiler Quality, Pressure Vessel, High Tensile Steel Plates in Grades S355J2G3, S355J2G3+N, ST52-3, ST52-3N, S355J2H, S355J2+N, ST52.0, E355, P355N, S355JO, High Temperature Service SA515 Grade 70, SA515 Grade 60, Low Temperature Service SA516 Grade 70, SA 516 Grade 60, ASTM A515 Grade-70, ASTM A515 Grade-60, ASTM A516 Grade-70, ASTM A516 Grade-60, SA537 Class 1, SA537 Class 2, ASTM A537 Class-1, ASTM A537 Class-2, Hardox 400, Hardox 450, Hardox 500, Plates RAEX 400, RAEX 450, RAEX 500, FORA 400, FORA 450, FORA 500, ABRAZO 400, ABRAZO 450, ABRAZO 500, NICRODUR 400, NICRODUR 450, NICRODUR 500, BRINAR 400, BRINAR 450, BRINAR 500, DUROSTAT 400, DUROSTAT 450, DUROSTAT 500, Dillidur 400V, Dillidur 500V, AR200, AR250, AR400, AR450, AR500, 200 HBW, 250 HBW, 400 HBW, 450 HBW, 500 HBW, 200BHN, 250BHN, 400BHN, 450BHN, 500BHN, TISCRAL, SAILHARD, JISCRAL Wear Resistant & Abrasion Resistant Steel Plates, ARMOX 500, ARMOX 500T, RAMOR 500, ARMOUR Plates for High Ballistic Protection, S690QL, S700MC, Dillimax 690T, Maxil 690, Naxtra 70, Supralsim 690, Weldox 700E, QstE 690 TM HSLA Plates, SAILMA 300, SAILMA 300HI, SAILMA 350, SAILMA 350HI, SAILMA 410, SAILMA 410HI, SAILMA 450, SAILMA 450HI, LRS Grade A, ABS Grade A, GL Grade A, DNV Grade A for Ship Building, AH-36, DH-36, EH-36, ASTM A36/A36M, IS-2062 Grade A, IS-2062 Grade B, SS400, S235JR, S275JR, S355JR, S355JO, S355J2, S355J2+N, S355J2G3, ASTM A283 Grade A, B, C D, C-40, C-45, AISI 1045, C-60, C-70, EN-8, EN-9, AISI 4140, EN-19, AISI 4340, EN-24

Hardox® 500

The bendable, weldable and highly abrasion-resistant steel.

Hardox® 500 is a bendable and weldable abrasion-resistant steel, with a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance.

Hardox® 500 increases payload and increases service life while maintaining good processability and toughness.

Dimension Range

Hardox® 500 plate is available in thicknesses of 4.0 – 103 mm (5/32 - 4.06"), and Hardox® 500 sheet in thicknesses of 2.0 - 6.5 mm (0.079 - 0.256"). Hardox® 500 plate is available in widths up to 3350 mm (131.89") and lengths up to 14630 mm (575.98"). Hardox® 500 sheet is available in widths up to 1650 mm (64.96") and lengths up to 16000 mm (62.92"). More detailed information on dimensions is provided in the dimension program.

Available Standards

EN 10029

General Product Description
The bendable, weldable and highly abrasion-resistant steel.
Hardox 500 is a bendable and weldable abrasion-resistant steel, with a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance. Hardox 500 increases payload and increases service life while maintaining good processability and toughness. Dimension Range Hardox 500 is available in thicknesses of 4.0 – 103 mm. Hardox 500 is available in widths up to 3350 mm and lengths up to 14630 mm. More detailed information on dimensions is provided in the dimension program.

Tolerances
More details are given in SSAB’s brochure 41-General Product Information Strenx, Hardox, Armox and Toolox-UK and Hardox®
Guarantees or at www.ssab.com.
Thickness
Tolerances according to Hardox Thickness Guarantees. Hardox® Guarantees meets the requirements of EN 10 029 Class A.
Length and Width
According to SSAB’s dimension program. Tolerances according to SSAB´s mill edge standards or tolerances that conform to EN 10
029.
Shape
Tolerances according to EN 10 029.
Flatness
Tolerances according to Hardox Flatness Guarantees Class D, which are more restrictive than EN 10 029.
Surface Properties
According to EN 10 163-2, Class A Subclass 1.
Bending
Tolerances are according to Hardox Bending Guarantees Class F.

Hardox® 550

At 550 HBW and with a toughness close to Hardox® 500

Hardox® 550, with a nominal hardness of 550 HBW and toughness close to Hardox® 500, increases wear life but not at the expense of crack integrity.

Dimension Range

Hardox® 550 is supplied in plate thickness of 8.0 – 65 mm, up to 2900 mm in width and up to 14630 mm in length. More detailed information on dimensions is provided in the dimension program.

Hardox® 600

The extra hard and tough steel for extreme wear

At a nominal hardness of 600 HBW, Hardox® 600 has a uniquely high impact toughness.

Especially suited for extreme wear conditions, it can still be cut and welded, making it an excellent choice for high-performance applications.

Dimension Range

Hardox® 600 is available in thicknesses of 6 – 65 mm. Hardox® 600 is available in widths up to 2000 mm and lengths up to 14630 mm. Preferred dimensions are 2000 x 4000 mm, other dimensons on request. More detailed information on dimensions is provided in the dimension program.

We mainly stock the Plates of following make : 

Azovstal Iron & Steel - Ukraine
Alchevsk Iron & Steel - Ukraine
ArcelorMittal Steel - Romania
Thainox Steel - Taiwan
Iscor - South Africa
Salzgitter Mannesmann - Germany
ThyssenKrupp Steel - Germany
Dillinger - Germany
Ruukki - Finland
Corus - U.K
Posco - Korea
Indu Steel - France
Indu Steel - Belgium
SSAB - Sweden
Kobe Steel - Japan
JFE Steel - Japan
Nippon Steel - Japan

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

PLATES / SHEETS / COILS / FLAT BARS
Plates Sheets 1 mm to 300 mm thickness - Cold Rolled, Hot Rolled
SA240 Grade 304, 304L, 304H, 309, 309S, 310S, 316, 316L, 316H, 321, 321H, 347, 347H, 317L
SA240 Grade 304LN, 316LN, 317LN, 304 LN, 316 LN, 317 LN
AISI Type 309 UNS S30900, 309S UNS S30908, 309H UNS S30909, 310 UNS S31000, 310S 
UNS S31008, 310H UNS S31009, 310Si Din 1.4841, 309Si Din 1.4828 X15CrNiSi20-12 EN10095
Uginox R20-12, Cronifer 2012, Avesta 4828, Outokumpu 4828, Din-1.4828 EN-10095
SA387 Grade 2, 5, 7, 9, 11, 12, 21, 22 Cl.1, Cl.2
ASTM A36, IS 2062 Grade A, IS 2062 Grade B, SS400, S235JR, S275JR
IS 8500 Grade FE490B, IS 8500 Grade FE570B, IS8500 FE 490B, IS8500 FE 570B
SA572 Gr.50, ASTM A572 Grade 50, S355J2, S355J2+N, S355J2N, S355J0 EN10025
SA573 Grade 58, SA573 Grade 65, SA573 Grade 70, SA573-58, SA573-65, SA573-70
LRS Grade-A, ABS Grade-A, GL Grade-A, DNV Grade-A, ABS Grade-A for Shipbuilding
AH-36, DH-36, EH-36 Approved & Certified by LRS, DNV, GL, ABS
SA36, JIS G3101 SS400, DIN 17100 St44-2, S275JR, DIN 17100 St37-2, S235JR
SA283 Grade C, JIS G 3101 SS 400, DIN17100 ST44-2, S275 JR, ST 37-2, S235 JR
SA 283/SA 283M Grade A, Grade B, Grade C, Grade D for Low and Intermediate Tensile Strength
SA515 Grade 55, SA515 Grade 60, SA515 Grade 65, SA515 Grade 70, SA515 Grade 70N
SA515 Grade-55, SA515 Grade-60, SA515 Grade-65, SA515 Grade-70, SA515 Grade-70N
SA516 Grade 55, SA516 Grade 60, SA516 Grade 65, SA516 Grade 70, SA516 Grade 70N
SA516 Grade-55, SA516 Grade-60, SA516 Grade-65, SA516 Grade-70, SA516 Grade-70N
SA516/516M SA20/20M SA516 Gr.60/70 MT+LTV Normalized Impact Tested Vacuum Degassed
ASME SA516 Grade 60/70 Fully Killed, Normalized, Vacuum Degassed for Boiler & Pressure Vessel
ASME SA516-70MT LTV Normalized Condition SA516/SA516M Grade 70 MT LTV
ASME SA516-70 HIC Tested according to NACE TM-0284 SA516 Gr.70 HIC
ASME SA516 Grade 70 HIC (Hydrogen Induced Cracking) acc. to NACE TM 0284
SA516 Grade 70 NACE MR-0175 HIC & SSCC Tested, SA516-70 NACE HIC+SSCC Tested
SA516-70N Nace MR-01-75 HIC (Hydrogen Induced Cracking) & SSCC Tested
SA516/516M Grade 60/70 Normalized & Impact Tested for Low Temperature Service
SA515/515M Grade 60/70 acc. to SA20/20M Normalized for High Temperature Service
SA-516-70 acc. to ASME II Part A Ed.2007, SA-516-70N acc. to ASME-II Part A Edition 2007
API 5L X42, API 5L X46, API 5L X52, API 5L X60, API 5L X65, API 5L X70, API 5L X80
API5LX-42, API5LX-46, API5LX-52, API5LX-60, API5LX-65, API5LX-70, API5LX-80
SA537 Cl.1, SA537 Class 1, SA537 Class-1, SA537 CL.I, SA537 Cl.I
SA537 Cl.2, SA537 Class 2, SA537 Class-2, SA537 CL.II, SA537 Cl.II
SA841 Grade B2, SA 841 Grade B-2, SA841 Gr.B2, SA841-B2, SA841 B2 Grade
ASME SA841 Grade B2, SA 841 Grade B-2, SA841 Gr.B2, SA841-B2, SA841 B2 Grade
ASTM A841 Grade B2, ASTM A841 Grade B-2, ASTM A841 Gr.B2, ASTM A841-B2 Grade
ASTM A/ASME SA841 Grade B2 HSLA for Pressure Vessels Produced by
Thermo-Mechanical Control Process (TMCP) A841/841M Grade B2
HARDOX 400, HARDOX 450, HARDOX 500, RAEX 400, RAEX 450, RAEX 500, HB400
FORA 400, FORA 450, FORA 500, ABRAZO 400, ABRAZO 450, ABRAZO 500, HB450
NICRODUR 400, NICRODUR 450, NICRODUR 500, BRINAR 400, BRINAR 450, BRINAR 500
DILLIDUR 400 V, DILLIDUR 450 V, DILLIDUR 500 V, AR400, AR450, AR500, HB500
S690QL, MAXIL 690, NAXTRA 70, DILLIMAX 690T, SUPRALSIM 690, WELDOX 700E
SA514 Grade B High-Yield-Strength Quenched & Tempered Alloy Steel Plate for Structural Steel
SA517 Grade B High-Yield-Strength Quenched & Tempered Alloy Steel Plate for Pressure Vessel
SAILHARD, TISCRAL, JISCRAL, LAS07 Wear Resistant Steel Abrasion Resistant Steel
200 BHN, 250 BHN, 400 BHN, 450 BHN, 500 BHN Wear Abrasion Resistant Steel
200 HBW, 250 HBW, 400 HBW, 450 HBW, 500 HBW Wear Abrasion Resistant Steel
ARMOX 500, ARMOX 500T, RAMOR 500, ARMOUR For Ballistic Protection
ARMOR Ballistic Steel MIL-A 46100 MIL-A12560 ARMOX 500T High Ballistic Protection
MIL A-46100 MIL A-12560 MIL-A-46100 MIL-A-12560 High Ballistic Steel Armor
Manganese Steel Plates X120Mn12 Din 1.3401, 12-14% Manganese
Hadfield Steel Plates X 120 Mn 12 Din 1.3401, 11-14% Manganese
SAILMA 300, SAILMA 300HI, SAILMA 350, SAILMA 350HI High Yield High Tensile Steel 
SAILMA 410, SAILMA 410HI, SAILMA 450, SAILMA 450HI High Yield High Tensile Steel
300Mpa, 350Mpa, 355Mpa, 410Mpa, 450Mpa, 500Mpa, 550Mpa High Yield Strength Steel
S355J2+N EN 10025, EN 10029 Table 1 Class A, B, EN 10163-2 Part 2 Class I, B Subclass 1
S355J2G3 acc. to EN10025, EN10029, EN10163 Part 2 Normalized Vacuum Degassed
S355J2G3 acc. to EN10025, S355J2G3 acc. to EN 10025, S355 J2G3 EN10025
S355K2G3 acc. to EN10025, S355K2G3 acc. to EN 10025, S355 K2G3 EN10025
S355JO acc. to EN10025, S355JO acc. to EN 10025, S355 JO EN10025
S235JO acc. to EN10025, S235JO acc. to EN 10025, S235 JO EN10025
S275JO acc. to EN10025, S275JO acc. to EN 10025, S275 JO EN10025
S235JR acc. to EN10025, S235JR acc. to EN 10025, S235 JR EN10025
S355JR acc. to EN10025, S355JR acc. to EN 10025, S355 JR EN10025
S275JR acc. to EN10025, S275JR acc. to EN 10025, S275 JR EN10025
ST 52-3 acc. to EN17100, ST52-3 acc. to DIN 17100 ST52-3 DIN 17100
CORTEN A, B, C ASTM A242, ASTM A588, ASTM A871, ASTM A852, ASTM A441, IS 513
CORTEN A, CORTEN B, CORTEN C, COR-TEN A, COR-TEN B, COR-TEN C Cold Rolled Steel
Corten A Din 1.8946 EN 10025-5 S355JOWP, Corten B Din 1.8963 EN 10025-5 S355JOW
15Mo3 acc. to EN10028-2, 15Mo3 EN 10028-3, 16Mo3 acc. to EN10028-2, 16Mo3 EN 10028-3
SA204 Grade A, SA204 Grade B, SA203 Grade A, SA203 Grade B
API-5L-X42, API-5L-X46, API-5L-X52, API-5L-X56, API-5L-X60, API-5L-X65, API-5L-X70
API 5LX-42, API 5LX-46, API 5LX-52, API 5LX-56, API 5LX-60, API 5LX-65, API 5LX-70
Duplex 2205, Duplex UNS S31803, Duplex Din 1.4462 EN 10088-3, Duplex SAF2205, Duplex SAF 2205
Duplex SAF2205 SANMAC, URANUS 45N, PREN>33, PREN>34, PREN>35, PREN>36 DIN 1.4462
Super Duplex 2507, Super Duplex UNS S32750, Super Duplex SAF2507, Super Duplex SAF 2507
Super Duplex SAF2507 UNS S32750 DIN 1.4410 EN10088 URANUS 47N(+) PREN = 41 A182-F53
Super Duplex UNS S32760 F55 ASTM A182 F-55 SA182 F55 DIN 1.4501 UNS 32760

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

 

 
 

Stainless steel, carbon steel, alloy steel, nickel, other ferrous & non-Ferrous metals in shape of Pipes, Tubes, Pipe Fittings, Flanges, Fasteners from India

CONTACT US ::

Ashtapad Overseas
204 , 2nd Floor, Gods Gift Tower, 1st Carpenter Street, Mumbai- 400004 (India).
Tel : +91-22-23841700
       +91-22-67437666
       +91-22-66595333
Fax : +91-22-23868298
E- Mail : export@ashtapad.com
Web : www.ashtapadoverseas.com


ONLINE ENQUIRY FORM ::

hardox 500 equivalent astm, hardox 500 equivalent, equivalent of hardox 500, hardox 550 equivalent, hardox plate equivalent




Nickel - Monel® - Inconel® - Incoloy® - Hastelloy® - Alloy 20 - Duplex
Trademark Notice - Some names are trade names and/or trademarks of specific manufacturers. Ashtapad Overseas, Mumbai, India is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.